How are implant-supported prosthetics made?

Process5 min readUpdated: November 14, 2026Funda Sarıkaya
How are implant-supported prosthetics made?
IN SHORT

Implant-supported prosthetics are made from impressions taken after the implants have fused with the bone. They can be fixed or clip-on (removable); fit is checked at try-in visits before delivery.

Types

There are two main options:

  • Fixed: screwed or cemented onto the implants
  • Clip-on: attaches to the implants and is removed for cleaning

Waiting for the implants to fuse

After placement, implants usually need 2–6 months to fuse with the bone. In suitable cases a temporary prosthesis can be worn during this time.

Impressions and try-ins

The implant positions are recorded with a scan or impression. Tooth arrangement and shade are checked at try-ins.

Delivery and care

The prosthesis is fitted and the bite adjusted. Cleaning around the implants and regular check-ups are important for a long life.

RELATED TREATMENTDentures and prostheticsDental prostheses replace missing teeth. Fixed prostheses such as crowns and bridges stay in place; full and partial dentures are taken in and out. Implant-supported dentures offer a solution between the two.

Frequently asked questions

How many implants are needed?

It depends on the prosthesis type and bone; usually between 2 and 6 per jaw.

Fixed or clip-on?

Chosen together based on bone, budget and care preferences.

Can my current denture be used?

In some cases it can be adapted by adding clips.

This article is for general information and does not replace an examination, diagnosis or treatment. The right treatment can only be decided after an examination by a dentist.

Have a question? Let’s talk at an examination.

Message us on WhatsApp or book a consultation.