How is a digital impression taken with iTero? A step-by-step scan

Process6 min readUpdated: 22 November 2026Funda Sarıkaya Oral & Dental Health Polyclinic
How is a digital impression taken with iTero? A step-by-step scan
SHORT ANSWER

A digital impression with iTero is taken by moving a pen-sized scanner tip over the teeth. The scanner captures a large number of images per second, and a 3D model of your teeth builds up on the screen during the scan. No impression paste is used, and the procedure usually takes a few minutes.

What is iTero?

iTero is an intraoral scanner made by Align Technology. It scans the surface of the teeth and gums with light and creates a colour 3D model on the computer. This model is the digital equivalent of the plaster model made from a paste impression.

Before the scan

At the appointment, your concerns and expectations are listened to first and an oral examination is carried out. No special preparation is needed for the scan; you do not need to eat beforehand or come on an empty stomach. Saliva on the teeth is gently dried with air for a clear image.

Short video: an iTero scan is done in the dental chair, without impression paste.

The scan step by step

The following steps are followed during the scan:

  • The scanner tip is moved over the upper teeth, starting from the chewing surfaces
  • The tongue and cheek sides of the teeth are scanned in turn
  • The same process is repeated for the lower jaw
  • A short bite scan is taken with your teeth closed
  • If any area is missing on the screen, only that area is rescanned

What does the scan feel like?

The scanner tip moves along without touching the teeth or with only light contact. Because your mouth is not filled with paste, swallowing and breathing are comfortable; short breaks can be taken if you wish. During the scan, you can watch the screen and see the model of your teeth take shape.

What happens after the scan?

The resulting 3D model is reviewed on the screen together with your dentist. The alignment of the teeth, the bite and the tooth surfaces can be shown magnified. Depending on the treatment plan, the model is sent digitally to the laboratory or for Invisalign planning; there is no need to ship a physical impression.

Which treatments is it used for?

Digital scanning can be used in the planning stage of many treatments:

  • Invisalign and clear aligner treatment
  • Records before braces treatment
  • Retainers and night guards
  • Planning of crowns, bridges and implant-supported prostheses
  • Follow-up records and comparison
RELATED TREATMENTInvisalignInvisalign straightens teeth step by step with a series of clear aligners made for you. Aligners are worn 20–22 hours a day and are usually changed every 1–2 weeks.

Frequently asked questions

How long does an iTero scan take?

Although it varies depending on the condition of the mouth, scanning both jaws usually takes a few minutes.

Is an iTero scan painful?

No. The scan is an optical procedure; no anaesthetic is needed. Apart from keeping your mouth open for a while, no noticeable discomfort is expected.

Is any preparation needed for the scan?

No special preparation is needed. Brushing your teeth before the scan is enough.

Does the scan involve radiation?

No. iTero captures images using light; it does not use X-rays.

This article is for general information and does not replace an examination, diagnosis or treatment. The right treatment can only be decided after an examination by a dentist.

Have a question? Let’s talk at an examination.

Message us on WhatsApp or book a consultation.